A water-soluble, fully synthetic high-temperature chain oil for automotive paint, electrocoating, drying and curing conveyors. Combines coating compatibility and penetrating lubrication with low evaporation and fumes. Confirm compatibility with site coatings, seals and the oil-supply system before use.
Characteristics
Water-soluble, high-VI fully synthetic fluid
Compatible with most water-based and cathodic coatings; helps dissolve and disperse coatings and reduce cratering
Low evaporation and fumes; penetrating lubrication with reduced dripping
Technical data
Product type
High-temperature chain oils
Operating temperature
-20 °C to +240 °C
Viscosity at 40°C
290 mm²/s
Typical test data
Property
Typical Value
Test Method
Kinematic Viscosity (40 °C), mm²/s
290
ASTM D445
Viscosity Index
140
ASTM D2270
Pour Point, °C
-21
ASTM D97
Flash Point (COC), °C
255
ASTM D92
Rust-Preventing Characteristics (60 °C, 24 h)
No Rust
ASTM D665
Evaporation Loss (100 °C, 22 h), %
0.6
ASTM D972
The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request.
Applications
Drying and curing oven chains in automotive paint lines
Overhead conveyors in water-based and oil-based paint
Select viscosity, application method and quantity to suit the equipment. Applications include, but are not limited to, those listed. Clean the reservoir and oil lines before changing lubricants. Do not mix different product types. Confirm compatibility with site coatings, seals and the lubrication system before use. Service range: -20 to +240 °C. Set relubrication intervals according to actual chain temperature, load and oil condition. Store sealed in dedicated clean containers; protect from water, moisture and contamination. Keep the reservoir clean during use.
Health and safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request. Do not use this product for purposes other than the intended application. Take care to protect the environment when disposing of used product.
