All products

TC-240

High Temperature Chain Oil

Overview

For conveyor chains in rock and glass wool curing ovens, industrial dryers and heat-treatment equipment. Focuses on chain-link adhesion and film retention, with lubrication and rust protection. Direct oil to pins and bushes, and regularly remove fibres and old oil deposits.

Characteristics

  • Focus on oil adhesion and film retention on chain links
  • For replenishment lubrication of continuous conveyors
  • Balances contact lubrication and rust protection

Technical data

Product type
High-temperature chain oils
Operating temperature
-30 °C to +240 °C
Viscosity at 40°C
300 mm²/s
Typical test data
PropertyTypical ValueTest Method
AppearanceClear LiquidVisual
Base Oil TypeSynthetic Oil/
Kinematic Viscosity (40 °C), mm²/s300ASTM D445
Viscosity Index101ASTM D2270
Pour Point, °C-20ASTM D97
Flash Point (COC), °C270ASTM D92
Copper Strip Corrosion (100 °C, 3 h), Rating1bASTM D130
Rust-Preventing Characteristics (60 °C, 24 h)No RustASTM D665
Evaporation Loss (100 °C, 22 h), %2.0ASTM D972

The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request.

Applications

Curing-oven chains in rock and glass wool plants

Drive chains in insulation-material drying lines

Industrial drying and heat-treatment chains

Other suitable oil-lubricated conveyor chains

High-temperature chain lubrication
High-temperature chain lubrication

Use & storage

Applications include, but are not limited to, those listed. Check temperature, load, oil supply and compatibility for similar duties. Direct oil to chain pins, bushes and other friction points. Control replenishment as specified by the equipment manufacturer. Remove fibres, dust and old oil deposits regularly. Adjust maintenance to chain movement and oil consumption. Check compatibility before changing oils. Keep out water and contaminants; reseal after use.

Health and safety

Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request. Do not use this product for purposes other than the intended application. Take care to protect the environment when disposing of used product.

Related products

All products
High Temperature Chain Oil

8801

8801 High Temperature Chain Oil

Operating temperature
-20 °C to +240 °C
Viscosity at 40°C
290 mm²/s
High Temperature Chain Oil

PB-20

PB-20 High Temperature Chain Oil

Operating temperature
-30 °C to +280 °C
Viscosity at 40°C
200 mm²/s
High Temperature Chain Oil

TC-270

TC-270 High Temperature Chain Oil

Operating temperature
-30 °C to +270 °C
Viscosity at 40°C
280 mm²/s