Made with high-viscosity refined base oil for Xiao Jingang reducers and enclosed gearboxes using semi-fluid grease. Focuses on metal-surface adhesion, extreme-pressure and anti-wear protection, and reduced operating noise. Check pumpability before centralized supply.
Characteristics
High-viscosity refined base oil
Good adhesion to metal surfaces
Extreme-pressure and anti-wear protection
Helps reduce operating noise
Low-temperature service down to -10 °C
Technical data
Product type
Greases
NLGI grade
See TDS
Operating temperature
-10 °C to +120 °C
Viscosity at 40°C
1500 mm²/s
Dropping point
170 °C
Typical test data
Property
Typical Value
Test Method
Appearance
Homogeneous semi-fluid grease
Visual
Base Oil Kinematic Viscosity (40 °C), mm²/s
1500
ASTM D445
Worked Penetration, 0.1 mm
367
ASTM D217
Dropping Point, °C
170
ASTM D2265
Copper Strip Corrosion (100°C, 24 h)
1b
ASTM D4048
Last Non-Seizure Load (PB), N
650
ASTM D2596
Weld Point (PD), N
2452
ASTM D2596
Corrosion Preventive Properties (52°C, 48 h)
Pass
ASTM D1743
The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request.
Follow reducer manufacturer requirements for consistency, fill quantity and relubrication. Select for speed, load, mounting position and seals. Confirm pumpability before centralized supply. Remove old grease and check compatibility before changing; do not mix product types or quality grades. Protect from water, moisture and contamination during storage and transport. Keep tools clean and collect used grease for proper disposal.
Health and safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request. Do not use this product for purposes other than the intended application. Take care to protect the environment when disposing of used product.
