For roll bearings in rolling mills, straighteners and sizing mills, as well as rolling-mill gear couplings and roller-table bearings. Key characteristics include extreme-pressure and wear protection, water washout resistance, corrosion protection, shear stability and high-temperature stability.
Characteristics
Excellent extreme-pressure and anti-wear performance
Excellent water washout resistance
Good shear stability
Good high-temperature stability
Excellent corrosion protection
Technical data
Product type
Greases
NLGI grade
2 / 3
Operating temperature
-20 °C to +180 °C
Viscosity at 40°C
450 mm²/s
Dropping point
NLGI 2: 278 °C; NLGI 3: 286 °C
Typical test data
Property
NLGI 2
NLGI 3
Test Method
Appearance
Blue
Blue
Visual
Thickener Type
Lithium Complex
Lithium Complex
/
Base Oil Type
Mineral Oil
Mineral Oil
/
Kinematic Viscosity (40 °C), mm²/s
450
450
ASTM D445
Kinematic Viscosity (100 °C), mm²/s
30
30
ASTM D445
Worked Penetration (25 °C), 0.1 mm
280
245
ASTM D217
Dropping Point, °C
278
286
ASTM D2265
Oil Separation (100 °C, 24 h), %
3.2
1.9
ASTM D6184
Water Washout (38 °C, 1 h), %
2.1
1.6
ASTM D1264
Apparent Viscosity (-10 °C, 10 s⁻¹), Pa·s
600
1000
ASTM D1092
Copper Strip Corrosion (100°C, 24 h), Rating
1b
1b
ASTM D4048
Corrosion Preventive Properties (52 °C, 48 h)
Pass
Pass
ASTM D1743
Last Non-Seizure Load (PB), N
800
800
ASTM D2596
Weld Point (PD), N
3089
3089
ASTM D2596
Base oil viscosity. Worked penetration: 60 strokes. NLGI grading: ASTM D217.
The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request.
Applications
Roll bearings in small/medium mills and roughing mills
Select for actual bearing temperature, speed, load and grease supply. Confirm suitability before use. Set centralised grease feed and intervals to equipment requirements; check delivery to each lubrication point. Remove old grease or confirm compatibility before changing. Avoid mixing different thickener systems. Store in a cool, dry and clean place, protected from moisture and contamination. Use promptly after opening.
Health and safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request. Do not use this product for purposes other than the intended application. Take care to protect the environment when disposing of used product.
