A polyurea grease with semi-synthetic base oil, in NLGI grades 2 and 3, for low-noise motor and rolling-bearing applications. Addresses cold starts and elevated-temperature lubrication, with attention to oil separation, sustained film supply, water washout, rust and corrosion protection.
Characteristics
Polyurea and semi-synthetic oil; NLGI 2 and 3
Base oil viscosity at 40 °C: 80 mm²/s
Designed for low-noise rolling bearing lubrication
Cold starts and elevated-temperature lubrication
Oil separation control and sustained film supply
Water washout, rust and corrosion protection
Technical data
Product type
Greases
NLGI grade
2 / 3
Operating temperature
-30 °C to +180 °C (recommended)
Viscosity at 40°C
80 mm²/s
Dropping point
NLGI 2: 265 °C; NLGI 3: 270 °C
Typical test data
Property
NLGI 2
NLGI 3
Test Method
Appearance
Uniform grease
Uniform grease
Visual
Thickener Type
Polyurea
Polyurea
/
Base Oil Type
Semi-Synthetic Oil
Semi-Synthetic Oil
/
Base Oil Kinematic Viscosity (40 °C), mm²/s
80
80
ASTM D445
Worked Penetration (25 °C), 0.1 mm
270
250
ASTM D217
Dropping Point, °C
265
270
ASTM D2265
Oil Separation (100 °C, 24 h), %
1.2
0.9
ASTM D6184
Water Washout (79 °C, 1 h), %
2
2
ASTM D1264
Copper Strip Corrosion (100 °C, 24 h)
Pass
Pass
GB/T 7326
Corrosion Preventive Properties (52 °C, 48 h)
Pass
Pass
ASTM D1743
Noise Level (6205 Bearing), dB Requirement: max. 32
28
28
S09101A
Low Temperature Torque (-30 °C), Starting, N·m
0.514
0.751
ASTM D1478
Low Temperature Torque (-30 °C), Running, N·m
0.054
0.076
ASTM D1478
The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request.
Select consistency for bearing size, speed, load and temperature. Follow equipment instructions for fill quantity and relubrication. Keep bearings and filling tools clean. Apply the required quantity evenly; check temperature, noise and operation during initial use. Clean lubrication points and check compatibility before changing grease. Prevent water, moisture and contamination; dispose of used grease properly.
Health and safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request. Do not use this product for purposes other than the intended application. Take care to protect the environment when disposing of used product.
