A polyurea grease with mineral base oil, available in NLGI grades 2 and 3 for rolling bearings in small and medium motors, fans and pump drives. Designed for quiet operation, vibration control and structure retention under shear, with oxidation and rust protection.
Characteristics
Polyurea and mineral base oil; NLGI 2 and 3
Base oil viscosity at 40 °C: 110 mm²/s
Designed for quiet motor bearing operation
Lubricating film and vibration control
Designed to retain structure under shear
Oxidation resistance and bearing rust protection
Technical data
Product type
Greases
NLGI grade
2 / 3
Operating temperature
-20 °C to +150 °C
Viscosity at 40°C
110 mm²/s
Dropping point
NLGI 2: 250 °C; NLGI 3: 260 °C
Typical test data
Property
NLGI 2
NLGI 3
Test Method
Appearance
Homogeneous grease
Homogeneous grease
Visual
Thickener Type
Polyurea
Polyurea
/
Base Oil Type
Mineral Oil
Mineral Oil
/
Base Oil Kinematic Viscosity (40 °C), mm²/s
110
110
ASTM D445
Worked Penetration (25 °C), 0.1 mm
281
250
ASTM D217
Dropping Point, °C
250
260
ASTM D2265
Corrosion Preventive Properties (52 °C, 48 h)
Pass
Pass
ASTM D1743
Low Temperature Torque (-20 °C), Starting, N·m
0.22
0.29
ASTM D1478
Low Temperature Torque (-20 °C), Running, N·m
0.05
0.04
ASTM D1478
Noise Level (6201 Bearing), Starting Abnormal Sounds, N
2
3
Company method BVT tester
Noise Level (6201 Bearing), Running Abnormal Sounds, N
2
3
Company method BVT tester
Impurities (≥10 / ≥25 / ≥75 μm), particles/cm³
200/0/0
300/200/0
/
The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request.
Applications
Rolling bearings in small and medium motors
Motor bearings in fans and ventilation equipment
Rolling bearings in pump drive motors
Motor bearings in appliances and office equipment
Sealed bearings requiring quiet operation
Light-duty rolling bearings at moderate temperatures
Select consistency for bearing size, speed, load and temperature. Follow equipment instructions for fill quantity and relubrication. Keep bearings and filling tools clean. Apply the required quantity evenly; check temperature, noise and operation during initial use. Clean lubrication points and check compatibility before changing grease. Prevent water, moisture and contamination; dispose of used grease properly.
Health and safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request. Do not use this product for purposes other than the intended application. Take care to protect the environment when disposing of used product.
