A polyurea grease with fully synthetic base oil for bearings, small gears and guide rails in cold climates, refrigeration equipment and machinery exposed to wide temperature changes. Supports frequent cold starts and continued lubrication during operation.
Characteristics
Polyurea and fully synthetic base oil; NLGI 2
Base oil viscosity at 40 °C: 32 mm²/s
Lubrication during cold starts and running
Designed for wide temperature variations
Lubricating film for bearings and sliding contacts
Friction, wear and rust protection
Technical data
Product type
Greases
NLGI grade
2
Operating temperature
-60 °C to +180 °C
Viscosity at 40°C
32 mm²/s
Dropping point
250 °C
Typical test data
Property
NLGI 2
Test Method
Appearance
Smooth, homogeneous grease
Visual
Thickener Type
Polyurea
/
Base Oil Type
Fully Synthetic Oil
/
Base Oil Kinematic Viscosity (40 °C), mm²/s
32
ASTM D445
Worked Penetration (25 °C), 0.1 mm
275
ASTM D217
Dropping Point, °C
250
ASTM D2265
Corrosion Preventive Properties (52 °C, 48 h)
Pass
ASTM D1743
Low Temperature Torque (-60 °C), Starting, N·m
0.85
ASTM D1478
Low Temperature Torque (-60 °C), Running, N·m
0.35
ASTM D1478
Last Non-Seizure Load (PB), N
618
ASTM D2596
The above data correspond to latest technology, modifications reserved. This information is intended as a guide and does not necessarily represent a marketing specification. In individual cases tests have to be carried out by the consumer. Further data upon request.
Applications
Bearings in machinery used in cold climates
Cold stores, freezers and refrigerated conveyors
Rolling bearings in small motors, fans and instruments
Follow equipment manufacturer instructions for fill quantity and relubrication, considering temperature, speed, load and seals. Apply grease evenly in the required quantity. Avoid overfilling; check temperature, noise and operation during initial use. Clean lubrication points and check compatibility before changing grease. Prevent water, moisture and contamination; dispose of used grease properly.
Health and safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request. Do not use this product for purposes other than the intended application. Take care to protect the environment when disposing of used product.
